Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Blythewood, SC (29016) · Local Professionals

Columbia Metal Roofing · Fast response in Blythewood and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Blythewood is where the pines open up and the lots get bigger, but the summers still bake a roof. From the two-story brick and vinyl homes in LongCreek Plantation to the farmhouses and equipment sheds off Highway 21, most of these roofs were never built for the Midlands heat and hail. That is where we come in.

Homeowners in Blythewood (29016) call Columbia Metal Roofing because we know how a metal roof behaves on a Blythewood lot: how it sheds the afternoon storms, how it reflects the sun before it ever reaches the attic, and how it holds up when a loblolly limb comes down. We are a Metal Roofing Alliance member, fully insured, and we work out of Columbia, so we are not hard to reach when a leak shows up after a storm.

Metal Roofing in Blythewood (29016)

Blythewood sits on the northern edge of Richland County, where the lots are wider and the tree canopy is heavier than you will find closer to downtown Columbia. That matters for roofing. Tall loblolly pines drop limbs and needles, which means gutters clog and fasteners get tested. The ground here also holds water after a heavy storm, so we plan for drainage around the drip edge and downspouts, not just on the roof. Many Blythewood homes sit on sloped lots with walk-out basements or crawlspaces, and access for a crew and a dumpster can be tight on a long gravel drive. We walk the property before we quote so there are no surprises on delivery day.

Our team has installed, repaired, and replaced metal roofs across Blythewood and the surrounding Columbia area, from standing seam on newer builds in Cobblestone Park to corrugated panel on barns and workshops out toward Ridgeway. We know the difference between a roof that looks right and one that is flashed right, and in a place that gets severe thunderstorms, hail, and the occasional ice storm, the flashing is what keeps you dry.

Our services in Blythewood

How a Job Works in Blythewood

Step 1: You call (803) 353-5064 or send us a request, and we set up a free on-site assessment. We look at the roof, the attic if we can get to it, the flashing, the gutters, and the access. You get a written estimate with the panel type, the price per square foot, and what we found, not a number pulled from the air.

Step 2: Once you approve, we pull the permit through the local building department and schedule the work. In Blythewood that often means coordinating with an HOA on panel profile and color before anything is ordered, and planning around the afternoon storm pattern in summer. We protect landscaping, stage materials where the truck can actually turn around, and keep the site secure each night.

Step 3: When the last panel is set and the flashing is sealed, we clean the yard, run a magnet over the drive for screws, and walk the roof with you. We do not leave until you have seen the finished job and know what to watch for.

Pricing in Blythewood depends on the size and pitch of the roof, the panel type, the condition of the decking, and how easy it is to get materials to the house. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts around $8 per square foot, and standing seam starts around $10 per square foot. A metal roof over existing shingles (retrofit) starts around $7 per square foot, and a full replacement starts around $9 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs start around $9 per linear foot. Every roof is different, so call (803) 353-5064 for a free estimate and a real number for your Blythewood home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Blythewood and nearby areas.

Do metal roofs make sense on the wooded lots in LongCreek Plantation and Cobblestone Park?
Yes, and for a specific reason: pine needles and leaf litter sit on asphalt shingles and hold moisture, which shortens their life. A metal roof sheds that debris faster, and a smooth panel profile makes it easier to blow or sweep clean. We also size the gutters and downspouts for the tree cover, because a standard gutter on a wooded Blythewood lot will overflow in a heavy storm.
How fast can you respond to storm damage in Blythewood?
We offer free inspections after a storm and prioritize active leaks and wind-lifted panels. Call (803) 353-5064 and describe what you are seeing. If a limb has punctured the roof or a panel is peeled back, we can often tarp or secure it the same day or the next, then schedule the permanent repair.
What does a typical metal roof cost in Blythewood?
For a standard ranch or two-story home, most installations land between the per-square-foot prices above, so a 2,000 square foot roof might run roughly $16,000 to $22,000 depending on panel type and complexity. Repairs are usually a few hundred dollars, and re-fastening a roof can run $750 and up. The free estimate is the only way to know for your house.
Do I need a permit for a metal roof in Blythewood?
In most cases, yes. A full replacement or re-roof typically requires a permit, and the thresholds and inspection requirements vary by jurisdiction. We handle the permit application for you, but you can also check with the local building department through the City of Blythewood website at https://www.richlandcountysc.gov to confirm what applies to your address.
What if my Blythewood HOA has rules about roof color or panel style?
Many Blythewood neighborhoods do have design guidelines, and it is smart to check before you order materials. We can provide panel samples and manufacturer color chips for your HOA review, and we will not order a profile that has not been approved. If there is a property line question with a neighbor, we keep the work inside your boundary and confirm setbacks before we start.
Are you insured for work at my Blythewood property?
Yes. We carry general liability insurance and workers' compensation coverage, and we are happy to provide a certificate of insurance before work begins. That protects you if anything goes wrong on the job, and it is one of the reasons to hire a local, accountable crew.
What maintenance does a metal roof need in Blythewood's climate?
Not much, but a yearly look matters. Clear pine needles and debris from the valleys and gutters, check the fasteners and washers for backing out, and look at the flashing around chimneys and skylights. After a hail or wind event, a quick inspection can catch a loose panel before it becomes a leak. We offer free estimates on inspections and can set up a simple annual check.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm