Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Springdale, SC (29170) · Local Professionals

Columbia Metal Roofing · Fast response in Springdale and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Springdale, South Carolina, sits just east of Columbia along Highway 1 and Platt Springs Road, where mid-century brick ranches and older mill-era homes share lots with tall loblolly pines and water oaks. The ZIP code 29170 covers a stretch of Lexington County that gets the full Midlands baking treatment every summer, and those long, hot afternoons take a visible toll on asphalt shingles.

Homeowners here call Columbia Metal Roofing because we understand what Springdale roofs go through: algae streaking, granule loss, and storm-driven leaks after the pop-up thunderstorms that roll through the Congaree basin. We are a Metal Roofing Alliance member, fully insured, and we give free on-site estimates for metal roof replacement and inspection throughout Springdale and the surrounding Columbia area.

Metal Roofing in Springdale (29170)

Springdale is a mix of established neighborhoods with mature tree canopies and tighter lot lines, plus some newer infill homes and small commercial properties along the main corridors. Many of the houses here were built between the 1950s and 1980s, and a good number still have their original or second-layer asphalt roofs. The soil is typical Midlands sandy loam over clay, which drains quickly but can shift slightly with our wet and dry cycles, so proper flashing at wall intersections and chimneys matters more than people expect. Tall pines drop limbs and needles, and shaded north-facing slopes stay damp longer, which is where you will usually find the first algae streaks and soft spots.

Our team has worked roofs across Springdale and the greater Columbia area, from simple ranch replacements to standing seam systems on homes with steep pitches and limited access. We know how to stage materials on narrow driveways, protect landscaping, and work around the afternoon heat that builds from May through September. When a roof is too far gone for repairs, we walk you through replacement options that reflect the actual sun, wind, and hail exposure this part of Lexington County gets.

Our services in Springdale

How a Job Works in Springdale

Step 1: You call us at (803) 353-5064 or request a free estimate online. We schedule an on-site assessment at your Springdale property, inspect the roof deck, flashing, fasteners, and attic ventilation, and give you a written scope with pricing. If you are dealing with an active leak, we treat it as a priority and can often get out the same week.

Step 2: Once you approve the scope, we pull the required roofing permit through the local building department and schedule the work. On tighter Springdale lots, we plan material drops and dumpster placement carefully so we are not blocking driveways or piling panels on your neighbor's property. If your home is in an HOA or a historic overlay, we help you understand what panel profiles and colors need approval before we order anything.

Step 3: After installation or repair, we clean the site, magnet-sweep for nails, and walk the roof and gutters with you. We do not consider the job done until you have seen the finished work and know how to reach us if anything comes up later.

Pricing in Springdale depends on roof size, pitch, access, and how much of the existing roof needs to come off. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and replacement at $9 per square foot. If your existing shingles are in good shape and code allows a retrofit, metal roof over shingles starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (803) 353-5064 for a free estimate and a firm number for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Springdale and nearby areas.

My Springdale ranch has a low-slope section over the carport. Can you install metal there without a full tear-off?
Yes, in many cases. Low-slope carport sections are common in Springdale's mid-century ranches, and we often use a ribbed panel or a standing seam profile with the right underlayment for the pitch. We inspect the deck first, because if the existing shingles are brittle or the decking is soft, a retrofit is not the right call. We will tell you honestly which approach makes sense.
A storm just dropped a pine limb on my roof in Springdale. How fast can you get out?
Call us at (803) 353-5064 and describe the damage. We prioritize active leaks and storm damage in Springdale and the surrounding area, and we can often get an inspection scheduled quickly, sometimes the same day. We document the damage for your insurance claim, tarp or secure the area if needed, and give you a written repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot home in 29170?
For a home around 1,500 square feet, a basic corrugated or ribbed panel roof often lands in the range of $8,000 to $12,000, while standing seam or stone-coated steel runs higher. The exact number depends on pitch, how many layers need removal, flashing details, and access. We give free on-site estimates so you get a real figure, not a guess.
Do I need a permit to replace my roof in Springdale, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Lexington County, and the rules and fees vary by jurisdiction. We pull the permit for you and schedule the required inspections. For the most current local requirements, check the City of Springdale website at https://www.lex-co.sc.gov or call the building department directly before you start a project.
My neighbor's tree drops limbs on my roof and my HOA has rules about metal roof colors. How do we handle that?
We can help with both. If limbs from a neighbor's tree are damaging your roof, that is usually a property-line and liability question you should document with photos and, if needed, a conversation with the neighbor. For HOA approval, we provide panel samples and specification sheets so you can submit the color and profile for review before we order materials.
Are you insured for roofing work at my Springdale property?
Yes. Columbia Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What maintenance should I do on a metal roof in Springdale between seasons?
Keep gutters clear of pine needles and leaf debris, especially after fall and spring storms. Have the roof inspected after any major hail or wind event, and check that fasteners and sealant at flashing points are intact. A quick annual inspection, which we offer as a free estimate, catches small issues before they become leaks.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm