Serving the Columbia area  ·  (803) 353-5064  ·  Open Mon-Sun 7am-7pm
📞 (803) 353-5064 Free Quote

Metal Roofing in Cayce, SC (29033) · Local Professionals

Columbia Metal Roofing · Fast response in Cayce and the Columbia area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+270Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Cayce, South Carolina, sits right where the Congaree River bends past the old mill village of Olympia and the tree-lined streets off Knox Abbott Drive. The housing stock here tells a story: 1920s mill cottages, post-war brick ranches, and newer builds tucked between the river and the busy commercial corridors of Highway 1 and I-26. Lots are often narrow and shaded by tall loblolly pines and oaks, which means roof access can be tight and debris is a constant battle.

Homeowners in Cayce (29033) call Columbia Metal Roofing because we understand the local climate: summers that bake asphalt shingles and afternoon thunderstorms that test every fastener. Whether you are near the Cayce Riverwalk or closer to the intersection of State Street and Frink Street, we bring metal roofing solutions that reflect heat and stand up to wind. As a Metal Roofing Alliance member, we install systems that are built for the Midlands, not just anywhere.

Metal Roofing in Cayce (29033)

Cayce properties present specific challenges that we have learned to handle. The older mill cottages in Olympia often have steep, irregular roof pitches and minimal attic ventilation, which can lead to ice damming in winter and heat buildup in summer. Many homes along the Congaree floodplain have gutters that clog with pine needles and magnolia leaves, causing fascia rot and foundation issues. We regularly install oversized gutters and leaf guards for these homes. On the newer side, the brick ranches and two-story homes near the Lexington County line often have low-slope porch roofs that need careful flashing details to prevent leaks. And because the area is prone to severe thunderstorms and occasional hail, we always check for wind-lifted panels and fastener back-out on existing metal roofs before recommending a repair versus a replacement.

Our team has worked throughout Cayce and the surrounding Columbia area for years, from the streets near Brookland-Cayce High School to the commercial strip along Charleston Highway. We know which neighborhoods have HOA design review and which historic districts require specific panel profiles. We also understand the local permitting process and can guide you through it.

Our services in Cayce

How a Job Works in Cayce

Step 1: It starts with a phone call to (803) 353-5064 or a request through our website. We schedule a free on-site assessment at your Cayce property, usually within a few days. We inspect your current roof, check the attic and flashing, and talk with you about your goals, whether that is a full replacement, a repair, or a retrofit over existing shingles. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits from the local building department. In Cayce, permit requirements vary by project scope, so we handle the paperwork and schedule inspections. Our crews are fully insured and trained on standing seam, corrugated panels, and specialty metals. For tight lots in Olympia or along the river, we plan material delivery and staging carefully to avoid blocking neighbors or damaging landscaping. If your home is in a historic district or HOA, we coordinate color and profile approvals before ordering materials.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris removal. We walk the property with you, show you the finished roof, and explain any maintenance tips. We do not leave until you are satisfied and the site is clean.

Pricing for metal roofing in Cayce depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and replacement at $9 per square foot. If you want to go over existing shingles, retrofit starts at $7 per square foot, but keep in mind local code limits the number of layers. Repairs start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. These are starting prices, and your final quote will reflect access, pitch, and any needed decking repairs. Call (803) 353-5064 for a free estimate tailored to your Cayce home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Cayce and nearby areas.

My 1940s bungalow in Olympia has a steep roof and old shingles. Can you install metal over them?
Possibly, but it depends on the number of existing layers and the condition of the decking. Local code limits shingle layers, so we will inspect and let you know if a retrofit is allowed or if a full tear-off is safer. We handle both options and can advise based on your roof's structure.
A storm just blew through Cayce and lifted some panels on my roof. How fast can you respond?
We prioritize storm damage calls in Cayce and the surrounding area. Call us at (803) 353-5064, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the roof temporarily if needed and provide a detailed repair estimate.
What does a typical metal roof repair cost in Cayce?
Most repairs start at $450, but the final cost depends on the issue: a simple flashing repair might be on the lower end, while a leak chase or panel replacement could be higher. We give you a firm quote after inspecting the roof, so you know the price before we start.
Do I need a permit for a metal roof replacement in Cayce?
Yes, a permit is commonly required for a full replacement or re-roof in Cayce. Requirements vary by jurisdiction, so we recommend checking with the local building department. You can find contact information on the City of Cayce website. We handle the permit application and inspections for you as part of our service.
My HOA requires a specific roof color. Can you help with approval?
Absolutely. We work with many HOAs in the Cayce area and can provide color samples and product specifications for your architectural review committee. We will coordinate the approval process before ordering materials to avoid delays.
Are you fully insured for work at my Cayce home?
Yes, Columbia Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Cayce's climate?
In Cayce, metal roofs benefit from annual inspections, especially after storm season. Check for loose fasteners, debris buildup in valleys, and any signs of flashing wear. We offer free estimates for inspections and can perform minor maintenance like screw replacement or gutter cleaning to extend the life of your roof.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

270+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 270 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (803) 353-5064

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm